EDF's Penly nuclear reactor suffering corrosion problems -BFM

·1-min read
The logo of EDF is seen on the French state-controlled utility EDF's headquarters in Paris

PARIS (Reuters) -One of two nuclear reactors at French utility EDF's Penly plant is suffering the same corrosion problem already detected or suspected on four other EDF reactors which have been halted, BFM TV reported on its website, quoting nuclear safety institute IRSN comments to French news agency AFP.

EDF and nuclear regulator ASN were not immediately available for comment. An IRSN spokesperson said IRSN would not elaborate on the comments made to AFP.

The problem has been discovered on the 1300 MW Penly 1 reactor, which had already been halted for maintenance.

It is the first time this corrosion problem has been spotted on this type of reactor, of which EDF has 11, AFP reported.

The four reactors currently halted because of the corrosion problem are the 1450 MW reactor models in Civaux and Chooz, the youngest models in EDF's fleet of 56 reactors.

EDF said in mid-December it had detected cracks on pipes of a reactor at the Civaux power plant in western France due to corrosion. The faults were detected close to welds on the pipes of the safety injection-system circuit in the two reactors at Civaux.

EDF extended the outage of its Civaux station as a result and also stopped the Chooz plant in eastern France that uses the same technology.

The IRSN had said at the time that checks on other EDF reactors were likely to be necessary.

(Reporting by Benjamin Mallet, writing by Geert De Clercq, editing by Chris Reese and David Gregorio)

Our goal is to create a safe and engaging place for users to connect over interests and passions. In order to improve our community experience, we are temporarily suspending article commenting