Install I9300XXUGNA5 Android 4.3 Stock Firmware on Galaxy S3

The Galaxy S3 (GT-I9300) recently received a new stock firmware update with base firmware I9300XXUGNA5. The update is based on Android 4.3 Jelly Bean and is exclusive for Galaxy S3 users in Switzerland.

Firmware details

Model: GT-I9300

PDA: I9300XXUGNA5

CSC: I9300AUTGNA1

MODEM: I9300XXUGMK6

Version: Android 4.3 Jelly Bean

Build date: 16 January

Regions: Switzerland

The latest stock firmware build is available as OTA update and through the Samsung Kies server. Those who are outside Switzerland and wish to install the update may follow our step-by-step guide.

I9300XXUGNA5 build is an unbranded version of firmware and can be installed on any unlocked GT-I9300 unit, regardless of country and region.

IBTimes UK reminds its readers that it will not be held responsible for any damage to the device. Before installing the stock firmware, users are advised to verify their devices meet following requirements.

Pre-requisites

1) Install USB Drivers for Samsung Galaxy S3 to connect the Android device with the computer.

2) Enable USB Debugging Mode on phone to connect it with the computer and use Android SDK with it. [Navigate to Settings>> About phone. Tap on Build Number several times until a message appears saying 'You are now a Developer.' Now go to Settings>> Developer Options to enable USB Debugging Mode.]

3) As the tutorial is likely to wipe out all data of the phone, create a backup. If the device is having any custom recoveries such as CWM/TWRP then backup data using the same.

4) If the Android phone powers off due to lack of battery while the installation process, it could damage the device. Therefore, the Galaxy S3 should have charge above 80% battery charge.

5) The device should be factory unlocked and not locked to a particular carrier.

6) The phone will lose custom ROM with the installation of official firmware. Also, the custom recovery will be replaced by the stock version.

7) The device will no longer belong to a rooted version with the installation of official firmware.

8) I9300XXUGNA5 Android 4.3 Jelly Bean firmware works only with Samsung Galaxy S3 GT-I9300. As flashing this on any other variant might brick the device, verify the model number of Galaxy S3 by navigating to Settings>> About phone>> Model number.

How to install I9300XXUGNA5 Android 4.3 Jelly Bean on Samsung Galaxy S3

 Step-1: Download I9300XXUGNA5 Android 4.3 Jelly Bean for Galaxy S3 to computer [Alternative links-1/ 2 / 3]

Step-2: Extract the downloaded firmware zip using winrar/7zip/winzip or any other extracting tool to get a .tar.md5 file with few other files, which are optional

Step-3: Download Odin v3.07 and extract it to get Odin3 v3.07.exe with some other files

Step-4: Switch off Galaxy S3

Step-5: Place the phone into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on the phone screen. Now press the Volume Up button to enter Download Mode

Step-6: Run Odin3 v3.07.exe as Administrator [To do so, right click on Odin.exe file then click on Run as administrator from context menu.]

Step-7: Connect the Galaxy S3 to computer using USB cable while it is in Download mode. Wait for some time until Odin detects the device. When the phone is connected successfully an Added message will appear under Odin. Also, the ID: COM box in Odin will turn light blue with COM port number, indicating successful connection

Note: If the Added message does not appear, then try to re-install USB derivers or change the USB port on the computer.

Step-8: Select these files extracted from I9300XXUGNA5folder to install on the phone

a) Click the PDA button and select the .tar.md5 file

b) Click the Phone button and select file with MODEM in its name

c) Click the CSC button and select file with CSC in its name

d) Click the PIT button and select the .pit file

Note: Ignore the last three steps (step-b, c and d) if such files do not exist.

 Step-9: In Odin enable Auto Reboot and F.Reset Time checkboxes. Click the Re-Partition checkbox if a .pit file has been chosen in the previous step

Step-10: Verify everything and click the Start button in Odin. The installation process should begin now and take about few minutes to complete

Step-11: When the installation process is completed, the phone will restart automatically and soon a PASS message with green background will appear in the extreme left box at the very top of Odin. Disconnect the phone from the computer

The Galaxy S3 should now be updated with I9300XWUGML4Android 4.3 Jelly Bean latest stock firmware. Navigate to Settings>> About phone to verify the new firmware version running on the device.

How to fix bootloop issue

If the Galaxy S3 gets stuck at booting animation (after step-11), then go to recovery mode by pressing and holding Volume Up, Home and  Power and buttons together. Now perform Wipe data/Factory reset then Wipe Cache Partition. Once the action is completed, reboot the phone by selecting reboot system now. In recovery mode, use Volume keys to scroll between options and Power button to select the desired option. Performing wiping task will erase the phone's internal memory data.

[Source: Honai of Android]